Airbench
Airbench range
The British manufacturer Airbench makes equipment that removes dust, fumes and mist right at the workstation and returns the cleaned air to the room. You plug the unit in and start work: no ductwork and no installation needed. Here is a short overview of the main product lines.

Airbench advantages
- No installation: plug the unit in and switch it on.
- The cleaned air stays in the room, so there is none of the heat loss that comes with ducted extraction.
- Quiet: under 70 dBA across the range.
- Assembled in the manufacturer's factory in the East of England.
- More than 10,000 units in service in the UK and abroad.
Specifications
Downdraught benches
An Airbench is a workbench with built-in dust and fume extraction. You work at what looks like an ordinary bench: dust and fumes are drawn down through the worktop into the filters, and the cleaned air is returned to the room. The fans move a lot of air slowly, so energy use is low. Filters are chosen for the job: the maker offers 14 tested standard filter sets.
| Model | What it is for |
|---|---|
| AirBench FN | General dust and fume extraction, easy access to the filters |
| AirBench FP | General dust and fume extraction, easy to customise |
| AirBench FPK, FKS | Bench with knee space for seated work (FKS: knee space on the right) |
| AirBench FPW | Welding and grinding |
| AirBench WB | Wet-filtered bench for combustible dust |
| AirBench RP | High dust volumes, built-in pulse-clean filter |
| AirBench FX | ATEX-rated bench for potentially explosive atmospheres |
| AirBench FE | Fumes are ducted to the outside |
| AirBench BD | Blowdown bench for coolant mist and swarf |
| AirBench BDS | Blowdown bench for solvent mist and other contaminants |
VertEx cross-draught systems
When a part is too big for a bench, VertEx draws dust and fumes away horizontally from behind the work area. The system is modular: modules can be placed side by side and built into a fully enclosed booth.
- VertEx VA: dust collection over a wide area.
- VertEx VAW: welding and grinding.
- VertEx VS: stainless steel, for clean rooms.
- VertEx VP: pulse-clean filter system.
- VertEx Booth VB: modular booth that keeps the dust fully inside.
More: Vertex modular structures.

OMF coolant mist filters
Oil and coolant mist rising from a metalworking machine is a hazard for the operator: breathing it in can cause respiratory diseases such as asthma and bronchitis. Airbench OMF is a stand-alone central mist filter that is connected to several machine tools, filters their mist and returns the cleaned air to the room. Depending on the model, the airflow is 500 to 4000 m³/h.
Filtration has three stages: a pre-filter catches chips and larger particles, a coalescing filter collects the mist into larger droplets that drain off the filter, and where needed a fine filter up to class H13.

High-quality and reliable solutions.
Ask us for a quote!
Our solutions meet the highest standards in the field and are easy to maintain, cost-effective and reliable.
- Increase productivity!
- Reduce production costs!
- Create a productive working environment!
Free demonstration.
A free demo can be ordered for this solution.


