Envotherm

Envotherm wastewater evaporators

The Danish manufacturer Envotherm develops systems for treating and reusing industrial wastewater. Since 2022 Envotherm has been part of the Anmasi Group. The evaporator separates the contaminants from the water: clean water goes back into production and only a small amount of concentrate has to be taken away.

Request a quoteWatch video

Envotherm wastewater evaporators

In short

If taking wastewater away is a big cost, Envotherm can cut its volume many times over and bring the water back into production. Envotherm works well with Anmasi washing machines: the washing water can be treated and returned to the same washing process. Send us the amount and origin of your wastewater and we will assess with the manufacturer which solution fits.

What problem does Envotherm solve?

Parts washing and other industrial processes produce wastewater that is expensive to take away and dispose of. The costs keep rising and environmental requirements are getting stricter. Envotherm treats almost any industrial wastewater whose main component is water: for example cutting fluids and other oily water, wastewater from alkaline cleaning and rinsing water containing heavy metals.

  • Envotherm typically cuts the volume of wastewater to be disposed of by 90-98%, depending on its solids content.
  • The treated water goes back into the washing process or, where the rules allow it, into the sewer.
  • Less fresh water, lower transport and handling costs.
Wastewater samples before and after the Envotherm evaporator

Two options

  • Treatment on site: the evaporator is installed at your plant and the treated water goes straight back into production.
  • Treatment at Envotherm's plant: you can send the wastewater to Envotherm's wastewater treatment plant in Grindsted, Denmark, where the whole treatment is done for you.

The evaporators come in nine sizes, for 240 to 15,000 m³ of wastewater a year: see Envotherm ZLD models.

Envotherm advantages

  • Up to 98% of the water can be reused.
  • Up to 66% lower energy use, because the heat of the outgoing steam is recovered.
  • Payback period of 18 to 36 months, according to the manufacturer.
  • Controlled by a Siemens S7 PLC with a touchscreen.
  • Fully automated: according to the manufacturer, maintenance takes up to 2 hours a week, and the unit is monitored online around the clock.
  • Before investing, you can have your own wastewater tested in the manufacturer's laboratory.

How does it work?

Envotherm evaporates the wastewater and splits it into two parts: distillate (90-98%) and concentrate (2-10%). The patented E-MVR technology uses the outgoing steam to heat the incoming wastewater, so energy use is up to 66% lower than with a conventional system. The unit runs continuously.

  • Pre-filtration and pH adjustment: a band filter or another suitable pre-filter removes solid particles, then the pH is adjusted.
  • Evaporation: clean water is separated from the dissolved contaminants.
  • Post-treatment with an activated carbon filter: where needed, removes residual substances, organic compounds and odours from the distillate.

Envotherm gives a contractual guarantee on the purity of the distillate, the annual capacity and the energy consumption, so the treated process water can be reused in production again and again.

Process diagram of the Envotherm E-MVR evaporator

Video

Watch the videos

On the left the Envotherm animation (in English), on the right the ANMASI video about the full process of the Envotherm evaporation system (in English).

Specifications

ZLD models: technical data

Energy use is in kWh per cubic metre of wastewater. The larger models use less energy per cubic metre.

ModelAnnual capacityEnergy useLengthHeightWidthWeight
ZLD 0.5240-480 m³60 kWh/m³1,716 mm2,112 mm1,004 mm850 kg
ZLD 1675 m³45 kWh/m³2,166 mm2,640 mm1,412 mm1,050 kg
ZLD 21,350 m³40 kWh/m³2,166 mm2,640 mm1,412 mm1,150 kg
ZLD 32,025 m³38 kWh/m³2,130 mm3,300 mm3,140 mm1,250 kg
ZLD 42,700 m³35 kWh/m³2,130 mm3,300 mm3,140 mm1,500 kg
ZLD 53,375 m³30 kWh/m³2,500 mm3,300 mm3,500 mm1,750 kg
ZLD 66,000 m³25 kWh/m³2,500 mm3,300 mm3,500 mm4,000 kg
ZLD 77,500 m³22 kWh/m³4,000 mm4,500 mm2,500 mm6,500 kg
ZLD 1015,000 m³20 kWh/m³4,000 mm4,500 mm2,500 mm8,000 kg

What we need to choose a model

  • The amount of wastewater per year and where it comes from (for example a washing machine or metalworking).
  • The composition of the wastewater: the manufacturer can test a sample in the laboratory and document the result.
  • Whether the treated water goes back into production or into the sewer.

High-quality and reliable solutions.

Ask us for a quote!

Our solutions meet the highest standards in the field and are easy to maintain, cost-effective and reliable.

  • Increase productivity!
  • Reduce production costs!
  • Create a productive working environment!