Machine tool cleaning and coolant recovery
Conventional machine cleaning methods are inefficient in terms of time and quality, and on most machines they involve replacing the coolant completely, which adds the cost of new concentrate and of recycling the old coolant. Modern technologies can make machine cleaning considerably more efficient and cut the time and material costs of the process.

Sludge and chips
Sludge and chips make the coolant in a machine tool thicker, sometimes even clogging the fine coolant channels in the spindle. Sludge and chips also considerably reduce the capacity of the machine's coolant tank, which can cause problems with cooling and thermal expansion of both the machine and its parts. Sludge usually collects at the bottom of the machine tank and builds up there. As the sludge fills the tank, there is less and less room for coolant, until in the end there is almost none left. With the MKR SF-500 unit we clean coolants and lubricants of chips, residues, dust and other mechanical contamination. We usually recommend doing this twice a year, but the actual cleaning interval depends on how heavily the machines are loaded and how they are run.
The result is coolant free of mechanical impurities down to 70 μ.
Cleaning tramp oil out of the coolant
Tramp oil has two unpleasant consequences.
First, it forms a film on the surface of the coolant, in other words a "five-star hotel for bacteria". Bear in mind that suppliers' claims about coolants being resistant to biological degradation are not actually true. Sooner or later every coolant collects tramp oil, and without access to air, bacteria inevitably start to multiply.
Second, tramp oil is abrasive by nature, which considerably reduces tool life. By cleaning tramp oil out of your coolants and lubricants you extend the life of valuable tools by up to 20%.
To clean tramp oil out of coolants and lubricants we use the MKR OTC-350 centrifuge, which removes mechanical contaminant particles down to 2 μm almost in passing.
What do you get in the end, and how does it pay off?
- You do not waste working time on maintaining the machines' coolant tanks, which takes a lot of time. By ordering this service you can focus on what brings in money: production.
- Coolant regeneration. By cleaning and restoring the old coolant you save on coolant.
- A high-quality result.
Conventional machine cleaning methods are not efficient in terms of either time or quality and usually mean replacing the coolant completely. In short: if your goal is to use working time as efficiently as possible, we are ready to help you.

How does the process work?
- Removing the tray, the pumps and other equipment that block access to the machine tank.
- Pumping the coolant out of the machine into the internal tank of the SF-500.
- Cleaning the filters and the inner walls of the tank.
- Pressure washing the machine tank.
- Removing residues and sludge from the bottom of the tank.
- Discharging the old coolant into an IBC container.
- Cleaning the coolant with a centrifuge from the IBC tank into a clean tank.
High-quality and reliable solutions.
Ask us for a quote!
Our solutions meet the highest standards in the field and are easy to maintain, cost-effective and reliable.
- Increase productivity!
- Reduce production costs!
- Create a productive working environment!





